|
|
|
 |
（Click for zoom-in） |
| wheel |
Dolly operation mechanism |
Belt conveyor |
Ingredient Belt conveyor |
Coal scuttle gate electric control equipment |
Metal structure |
Wheel(L) |
1.3m |
Motor |
type |
TDO3-160M-12/6 |
Performance |
Throughput (Q) |
1500t/hr |
Performance |
Throughput (Q) |
1500t/nr |
尺寸 |
Gate width (B) |
400mm |
Form |
Double combination I-shape bracket |
Gauge(I) |
3m |
功率(N) |
5Kw/7.5kw |
带宽(B) |
1000mm |
带宽(B) |
1000mm |
Gate height (H) |
JD3-100s-6 |
梁高(H) |
1.8m |
Number of wheels (n)(n) |
4 |
转速(n) |
450rpm/950rpm |
带速(v) |
1.6m/s |
带速(V) |
1.6m/s |
电动机 |
型号 |
1.5Kw |
梁宽(B) |
1.8m |
直径(D) |
400mm |
制动器 |
型号 |
TJ2-200 |
机长(L) |
27.8Im |
机长(L) |
2m |
功率（N） |
1000rpm |
梁长(L) |
30m |
速度 |
第一档(V进) |
23.04m/min |
制动力距(MZL) |
16Kg-m |
电动滚筒 |
型号 |
TDY-75.2.0-80.50 |
电动滚筒 |
型号 |
JDY 40.2.0-80.32 |
转速（n） |
WD-78 |
设计生产能力 |
1500t/hr |
第二档(V退) |
11.19m/min |
配用电磁铁型号 |
MZDI-200 |
功率(N) |
15Kw |
功率(N) |
4Kw |
蜗轮箱 |
型号 |
|
总功率(N) |
125KW |
| 立减箱 |
型号 |
ZSC600-IV2 |
总传动比(i总) |
37.9 |
带速(V) |
1.6m/s |
带速(V) |
1.6m/s |
传动比（i） |
40 |
总重量（G） |
162T |
传动比(i) |
37.9 |
工作类型(JC％) |
100％ |
直径(D) |
500mm |
直径(D) |
320m |
工作类型（JC％） |
100％ |
整机移动导电采用安全滑线型号HDH-1000-1250 |
|
| |
大车运行机构 |
大车运行机构 |
车轮 |
型式 |
开式 |
减速器 |
型号 |
JZQ-500-II-2Z |
车轮 |
,轨距(L) |
30m |
.电动机 |
型号 |
YZB-160L-6 |
开式传动机构 |
类型 |
圆拄齿轮 |
直径(D) |
4000mm |
传动比(i) |
10.35 |
轮距×轴距 |
0.78m×5m |
功率(N) |
11KWX4 |
小齿轮齿数(ZI) |
21 |
斗数(Z) |
9(双向) |
开式传动机构 |
取料机构类型 |
摆线针轮 |
轮数(n) |
8 |
转速 |
935r/min |
惰轮齿数(Z2) |
43 |
单斗容量 |
0.03m |
传动比i |
12.8 |
直径(D) |
500mm |
减速器 |
型号 |
蜗轮减速器 |
驱动轮齿数(Z3) |
55 |
轮数 (N) |
5.66rpm/11.3rpm |
摆线针轮针数Z1 |
10 |
速度 |
第一档(V进) |
6.47m/min |
|
40 |
模数(m) |
8mm |
|
传动比(i) |
传动比 |
72.62 |
电动机 |
型号 |
JDOC-180ZM-8/4 |
摆线针轮针数Z2 |
128 |
第二档(V退) |
14.24m/min |
制动器 |
型号 |
TJ2-200 |
总传动比(i) |
104.8 |
功率(N) |
15KW/22KW |
总传动比(i总) |
129.375 |
推荐钢轨(P) |
43`50Kg/m |
制动力距(MZL) |
16kg-m |
工作类型(JC％) |
25％ |
转速(n) |
750rpm/500rPM |
工作类型(JC％) |
100％ |
最大轮压(pmax) |
20T |
配用电磁铁型号 |
MZDI-200 |
步进距离 200 400mm |
|
Main technical parameters |
1、The cart and dolly running are all speed-adjusted by transducer.
2、This machine adopts the PLC program concentrated control on the reclaiming, cart and dolly running, lighting and watering, etc in the driver's room.
3、The throughput of the reclaimer is Q=1500T/HV and the span could be 32m, 28m and 25m, it could work backward and forward, from left to right and reclaim the materials from positive and negative directions at any point.
4、If the machine is equipped with claw equipments, when the materials are piled with 45°slope, it means the normal operation; with 60°, the claw reaches the material stock first while the bucket wheel machine fails to take it, then the dolly running mechanism shall be started to take the claw off before continuous work.
5、In order to protect the reclaiming coal tub of the bucket wheel, it shall be 50MM away from the ground.
6、Material height offside engine shall be set inside the chute of the machine, retaining switch and rubber baffle on the top of the dolly rail to prevent the aberration of the dolly. The dart frame shall be set with the retaining switch and rubber baffle too.
7、In order to prevent the seeper on the working site in rainstorm season, this equipment shall consider the solution of gate legs adjustment(SGL240-13-00).
8、The ingredient conveyor is electrically controlled on the matching flow, in the future the computer and electrical belt measure will be installed to control the mixture ratio.
9、The metal structure of this equipment all experiences the sand spray and rust removal, spray the anticorrosive varnish once and the green primer twice.
10、As the gate legs are adjustable, the chassis of the sliding current collector shall have the corresponding adjustable cushion coat.
11、The rail slope control on the dart in the civil work shall be controlled within the range of 0 to 10 and the gauge error shall not be ±5MM.
12、The relative height of the upper and lower beam shall not exceed 10MM and the non- perpendicularity isH/3000, namely 0.3MM.
13、The reclaiming dart and dolly designed in this machine both have two speeds, either is available according to the operation for the convenience of the relation adjustment of charge and discharge, backward and forward.
14、The cost of the safety sliding line is not included in the whole machine. |
| |
|
|
14 |
HQL1500-30-14 |
slider current collector |
1 |
Component |
1000 |
1000 |
|
13 |
HQL1500-30-13 |
adjustable gate leg |
6 |
A3 |
1603 |
9620 |
|
12 |
HQL1500-30-12 |
dolly integrator |
1 |
Component |
5000 |
5000 |
|
11 |
HQL1500-30-11 |
rubber buffer |
4 |
Component |
100 |
400 |
|
10 |
HQL1500-30-10 |
operation room |
1 |
Component |
2850 |
2825 |
|
9 |
HQL1500-30-9 |
coal bucket electric control assembly |
1 |
Component |
1996 |
1996 |
|
8 |
HQL1500-30-8 |
ingredient transmission belt machine |
1 |
Component |
1723 |
1723 |
|
7 |
HQL1500-30-7 |
transmission belt machine |
1 |
Component |
9914 |
9914 |
|
6 |
HQL1500-30-6 |
lower beam |
2 |
A3 |
14182 |
28364 |
|
5 |
HQL1500-30-5 |
main beam |
1 |
A3 |
79826 |
79826 |
|
4 |
HQL1500-30-4 |
reclaiming mechanism |
2 |
Component |
6440 |
12880 |
|
3 |
HQL1500-30-3 |
claw |
2 |
A3 |
1719 |
3439 |
|
2 |
HQL1500-30-2 |
Dolly operation mechanism |
2 |
Component |
7610 |
15200 |
|
1 |
HQL1500-30-1 |
Cart operation mechanism |
4 |
Component |
3348 |
13392 |
|
SN |
code |
Name quantity |
|
Material |
single piece |
total |
remark |
weight |
| |
|
|
|
|
|
总图 |
无锡市中机机械制造有限公司 |
| |
|
|
|
|
|
| |
|
|
|
|
|
Mark |
处数 |
分区 |
更改文件号 |
签名 |
年月日 |
混匀双斗轮双向取料机 |
设计 |
王芳华 |
|
标准化 |
吴荣生 |
|
阶段标记 |
重量 |
比例 |
校队 |
许国联 |
|
审定 |
曹子贤 |
|
|
|
|
|
185.6t |
1:50 |
审核 |
钱风源 |
|
|
|
|
HQL1500-30 |
工艺 |
谈纬红 |
|
Approval |
|
|
共张第张 |
|
|
|
